Canon MAXIFY MB2020

-Canon-427 views

Canon MAXIFY MB2020 Drivers Download, Software, Wireless Setup, Installation, Scanner Driver, Manual, For Windows 10, 8, 7, Mac – The Canon MB2020 is an all-in-one inkjet printers with scanning and copying features, automatic note feeder, and internal fax. This is related to Windows and macOS. The ability of the leading paper tray is 250 sheets, a generous size. This paper can accept the paper with a weight of about 76 # base, much larger than the usual one. There is an automatic note feeder to allow you to copy and scan stacks of a web page in one procedure. This printers has a display screen of 2.6 inches in size. You can connect directly to a PC with a USB cable or your network router wirelessly with WiFi. This version has internal fax, can save incoming faxes if the paper runs out, and can also send faxes from a connected COMPUTER. When setting it to use, the Canon Maxify MB2020 calls for an area that measures 10.2 inches high by 18.1 inches wide by a depth of 24.7 inches.

Canon MAXIFY MB2020 Drivers
Canon MAXIFY MB2020

Canon MAXIFY MB2020 is compatible with AirPrint, and also consists of the Maxify Cloud Link interface, which allows you to upload checked paper to Evernote, DropBox, Google Drive, and OneDrive (formerly SkyDrive) directly from the printer screen, along with printed images from online photo CDs, templates office design, and more, also without a computer. It also supports Google Cloud Print, which allows you to send notes to your printer from a computer system, smart device, or any device connected to the Web. You can also print & also scan images or documents from your mobile phone with the Maxify Printing Solutions application made there.

High-quality total output for the Canon MAXIFY MB2020 is slightly above average for an inkjet, with text above par, small sub-par graphics, and typical images. The book is sharp for inkjet and must also be very good for all types of documents apart from those requiring small typography. With graphics, most backgrounds reveal traces of banding (regular patterns of striation). Thin lines are all gone in 2 illustrations. Some graphs show dithering in the type of graininess. High-quality graphics are perfect for much internal company uses, although I would think twice about using them for handouts that are most likely for the people I try to like.

Most of the photos I published with Canon MAXIFY MB2020 have something to do with the best quality that you get from a pharmacy print. Our monochrome examination photo shows a secondary colour, and there is also some loss of detail in bright locations in several editions. Operating costs, based on Canon’s prices and yield figures for cartridges, are 2.7 cents per monochrome webpage and 8 cents per colour webpage. They are low for inkjet at a cost, especially colour costs.

See Also: Canon MAXIFY iB4020 Drivers, Install, Scanner, Software Download

OS Support systems :

Windows 10 32-bit, Windows 10 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Macintosh, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x

Canon MAXIFY MB2020 Drivers Download, Manual, Scanner For Windows 10, 8, 7, Linux

How to Set Up Your Canon MAXIFY MB2020 for Windows:

For some people, setting up a printer on a computer can be a hassle. This article will explain how to set up your Canon PIXMA printer to a computer with Windows operating system. Every printer should have a driver CD in its packages, so make sure you check it before.

  1. Insert the CD that came in the package
  2. Follow the installation wizard
  3. Once its finish, test your printer to make sure it’s working

There is also an option to set up your Canon PIXMA without installing extra software by following the steps below:

  1. Connect your printer via USB cable.
  2. Open Control Panel, and double-click the Printers or Printers and Fax
  3. A new window will occur, then choose to Add a printer
  4. A Windows Printer Wizard will appear, then click Next to start the wizard.
  5. There will be choices for installing a Local or Network printer. Choose Local printer attached to this printer, then click Next.
  6. A prompt for the printer driver’s location will appear. Choose the directory of your driver or click on the printer CD.
  7. After the installation is finished, test your printer by right-clicking the printer icon and click properties. In that window, choose the Print Test Page. Your printer should work properly.

How to Set Up Your Canon MAXIFY MB2020 For Mac:

Setting up Canon PIXMA on Mac can be a bit difficult for some people due to several differences from the installation on Windows OS. This article will give you a brief explanation on how to set up your Canon PIXMA printer on Mac OS.

  1. First, you have to uninstall any other Canon driver that exist in your Mac
  2. Disconnect your printer.
  3. Download the software driver on Canon official website.
  4. Open the driver and follow the installation wizards.
  5. After the installation is finished, go to the system preference by clicking the Apple icon at the top right.
  6. Connect your printer via the USB port and turn it on.
  7. Open Print and Fax and click on the plus button on the left side of the window to add a printer. Your new printer should appear on the list. If you didn’t find your printer name, redo step 1 to step 6 and make sure the driver for your current printer is installed properly.
  8. Click on your current printer model and click Choose a Driver or Printer Model, and then click Select Printer Software. Choose your printer from the list and click
  9. Your printer should work properly.

How to Set Up Wireless Connection on Your Canon MAXIFY MB2020:

Setting up a wireless connection of Canon PIXMA on your computer is actually pretty easy. This article will describe the steps to install a wireless connection using the WPS connection method. There are some requirements that need to be fulfilled before starting the installation, such as your access point should have a physical WPS push button and your network should use the WPA2 security protocol or WPA.

  1. First, turn on the printer. Press and hold on the Wi-Fi button until the indicator lamp flashes once. Make sure it flashes blue light.
  2. Press the WPS button on your access point within 2 minutes. The blue light will continue flashing while looking for your access point. Once it connects to the access point, the power and Wi-Fi lamp will flash.
  3. If the process is successful, both the power and Wi-Fi lamp will stop flashing and remain lit.
  4. To confirm whether the process is successful or not, try to print out the network settings of your printer.
  5. Put a sheet of paper.
  6. Press and hold the Resume/Cancel button until the indicator lamp flashes 15 times, then release it. Your printer will print the network information page and it means the installation is successful.


Leave a Reply

Your email address will not be published. Required fields are marked *

News Feed