Canon MAXIFY MB5420

-Canon-511 views

Canon MAXIFY MB5420 Drivers Download, Software, Wireless Setup, Installation, Scanner Driver, Manual, For Windows 10, 8, 7, Mac – The Canon Maxify MB5420 provides business-worthy attributes at a realistic cost. It’s pricey for a home printer. However, it’s such a solid deal compared to many other company designs that we awarded it our Editor’s Selection as the most effective printer for local business.

Canon MAXIFY MB5420 Drivers
Canon MAXIFY MB5420

The Canon MAXIFY MB5420 is outfitted with two paper trays, which can hold a total of 500 sheets. Using the 50-sheet paper feeder, the device can simultaneously scan both sides of a two-sided paper, which the duplexer can after that make into two-sided prints. The MB5420 is developed for heavy use, with a month-to-month responsibility cycle of 30,000 pages. To assist lower printing prices, high-yield ink cartridges are offered, which might reduce printing costs by approximately fifty percent.

The Canon MAXIFY MB5420 is AirPrint suitable, and Mopria certified for straight printing for iOS and also suitable Android devices, as well as it can print from the Canon Print application too. From the printers, you can access Maxify Cloud Web link– which lets you print images from on the internet photo CDs, office themes, and also a lot more, even without a computer, and upload checked papers directly to Evernote, DropBox, Google Drive, and OneDrive. It also supports Google Cloud Print, which lets you send documents to your printers from any Web-connected computer system, smartphone, or device. It can link to a network using Ethernet or Wi-Fi, and also straight to a computer system through USB. I tested it over an Ethernet link with drivers installed on a PC running Windows 10.

The Canon MAXIFY MB5420’s total result top quality, based upon our screening, was excellent for an inkjet, with above-par photo high quality and also somewhat above-par message and graphics. Text top quality needs to be excellent sufficient for any business use, other than possibly for those requiring tiny fonts. With graphics, some backgrounds revealed light banding (a regular pattern of pale striations), the only problem of note. The Canon MB5420 did well with thin tinted lines, and also in setting apart in between comparable tones, as well as color were well saturated. A lot of photo prints were better than the top quality I would certainly get out of drugstore prints. There was some loss of information in bright locations in a couple of photographs.

See Also: Canon MAXIFY MB5320 Drivers, Install, Scanner, Software Download

OS Support systems :

Windows 10 32-bit, Windows 10 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Macintosh, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x

Canon MAXIFY MB5420 Drivers Download, Manual, Scanner For Windows 10, 8, 7, Linux

How to Set Up Your Canon MAXIFY MB5420 for Windows:

For some people, setting up a printer on a computer can be a hassle. This article will explain how to set up your Canon PIXMA printer to a computer with Windows operating system. Every printer should have a driver CD in its packages, so make sure you check it before.

  1. Insert the CD that came in the package
  2. Follow the installation wizard
  3. Once its finish, test your printer to make sure it’s working

There is also an option to set up your Canon PIXMA without installing extra software by following the steps below:

  1. Connect your printer via USB cable.
  2. Open Control Panel, and double-click the Printers or Printers and Fax
  3. A new window will occur, then choose to Add a printer
  4. A Windows Printer Wizard will appear, then click Next to start the wizard.
  5. There will be choices for installing a Local or Network printer. Choose Local printer attached to this printer, then click Next.
  6. A prompt for the printer driver’s location will appear. Choose the directory of your driver or click on the printer CD.
  7. After the installation is finished, test your printer by right-clicking the printer icon and click properties. In that window, choose the Print Test Page. Your printer should work properly.

How to Set Up Your Canon MAXIFY MB5420 For Mac:

Setting up Canon PIXMA on Mac can be a bit difficult for some people due to several differences from the installation on Windows OS. This article will give you a brief explanation on how to set up your Canon PIXMA printer on Mac OS.

  1. First, you have to uninstall any other Canon driver that exist in your Mac
  2. Disconnect your printer.
  3. Download the software driver on Canon official website.
  4. Open the driver and follow the installation wizards.
  5. After the installation is finished, go to the system preference by clicking the Apple icon at the top right.
  6. Connect your printer via the USB port and turn it on.
  7. Open Print and Fax and click on the plus button on the left side of the window to add a printer. Your new printer should appear on the list. If you didn’t find your printer name, redo step 1 to step 6 and make sure the driver for your current printer is installed properly.
  8. Click on your current printer model and click Choose a Driver or Printer Model, and then click Select Printer Software. Choose your printer from the list and click
  9. Your printer should work properly.

How to Set Up Wireless Connection on Your Canon MAXIFY MB5420:

Setting up a wireless connection of Canon PIXMA on your computer is actually pretty easy. This article will describe the steps to install a wireless connection using the WPS connection method. There are some requirements that need to be fulfilled before starting the installation, such as your access point should have a physical WPS push button and your network should use the WPA2 security protocol or WPA.

  1. First, turn on the printer. Press and hold on the Wi-Fi button until the indicator lamp flashes once. Make sure it flashes blue light.
  2. Press the WPS button on your access point within 2 minutes. The blue light will continue flashing while looking for your access point. Once it connects to the access point, the power and Wi-Fi lamp will flash.
  3. If the process is successful, both the power and Wi-Fi lamp will stop flashing and remain lit.
  4. To confirm whether the process is successful or not, try to print out the network settings of your printer.
  5. Put a sheet of paper.
  6. Press and hold the Resume/Cancel button until the indicator lamp flashes 15 times, then release it. Your printer will print the network information page and it means the installation is successful.


Leave a Reply

Your email address will not be published. Required fields are marked *

News Feed