by

Canon PIXMA MG5522

-Canon-396 views

Canon PIXMA MG5522 Drivers Download, Software, Wireless Setup, Installation, Scanner Driver, Manual, For Windows 10, 8, 7, and Mac – The Canon PIXMA MG5522 is an advanced wireless inkjet image all-in-one printer with an intelligent design supplying a combination of high efficiency as well as actual convenience. Print gorgeous, indeterminate pictures as much as 8.5″ x 11″ as well as crisp files with remarkable quality. The Canon PIXMA MG5522 offers 4800 x 1200 optimum shade dpi with 2pl technology, five individual ink containers, and the ChromaLife100+ system. If a shade goes out, you only replace the ink storage tank you require. And also, the snap edge attribute allows for fast access to the ink tanks for simple substitutes.

Canon PIXMA MG5522 Drivers
Canon PIXMA MG5522

With a 2.5″ LCD, the MG5522 allows you to sneak your pictures before you print, and also remedy your photographs with Auto Photo Fix II. The PIXMA MG5522 features the benefit of PIXMA Printing Solutions (PPS), which allows you to print images and also files from your mobile phone. With the cloud print function, you can print straight from pick prominent on the internet Cloud services such as Picasa Web Albums, Flickr, Facebook, Twitter, Dropbox, and so on, either at the printer itself or with your smartphone using the cost-free PPS application.

AirPrint permits you to print straight from your iPhone, iPad, or iPod touch wirelessly. At the same time, built-in Wi-Fi technology enables you to print and also scan wirelessly from virtually anywhere around your residence. The MG5522 additionally provides wireless auto power on, a hassle-free feature that instantly powers up the printer whenever you send a photo or file to be printed. Built-in auto duplex printing lets you immediately print on both sides of the paper as well as can decrease paper consumption by approximately 50%, helping you to conserve money and also the environment.

Full HD movie print turns your favorite HD flick clips captured with your compatible Canon EOS Digital SLRs, PowerShot digital video cameras as well as VIXIA electronic camcorders right into lovely prints! The auto scan setting acknowledges the type of initial you’re scanning, then scans, as well as saves with the proper setups instantly. Flying start helps you get going quick – just push the power switch, and also, you can begin inputting commands in secs. And also, a peaceful setting lets you print anytime without fretting about disturbing those around you.

See Also: Canon MG5520 Drivers, Install, Scanner, Software Download

OS Support systems :

Windows 10 32-bit, Windows 10 64-bit, Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Macintosh, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x, Mac OS X 10.9.x, Mac OS X 10.8.x, Mac OS X 10.7.x, Mac OS X 10.6.x

Canon MG5522 Drivers Download, Manual, Scanner For Windows 10, 8, 7, Linux

How to Set Up Your Canon PIXMA MG5522 for Windows:

For some people, setting up a printer on a computer can be a hassle. This article will explain how to set up your Canon PIXMA printer to a computer with Windows operating system. Every printer should have a driver CD in its packages, so make sure you check it before.

  1. Insert the CD that came in the package
  2. Follow the installation wizard
  3. Once its finish, test your printer to make sure it’s working

There is also an option to set up your Canon PIXMA without installing extra software by following the steps below:

  1. Connect your printer via USB cable.
  2. Open Control Panel, and double-click the Printers or Printers and Fax
  3. A new window will occur, then choose to Add a printer
  4. A Windows Printer Wizard will appear, then click Next to start the wizard.
  5. There will be choices for installing a Local or Network printer. Choose Local printer attached to this printer, then click Next.
  6. A prompt for the printer driver’s location will appear. Choose the directory of your driver or click on the printer CD.
  7. After the installation is finished, test your printer by right-clicking the printer icon and click properties. In that window, choose the Print Test Page. Your printer should work properly.

How to Set Up Your Canon PIXMA MG5522 For Mac:

Setting up Canon PIXMA on Mac can be a bit difficult for some people due to several differences from the installation on Windows OS. This article will give you a brief explanation on how to set up your Canon PIXMA printer on Mac OS.

  1. First, you have to uninstall any other Canon driver that exist in your Mac
  2. Disconnect your printer.
  3. Download the software driver on Canon official website.
  4. Open the driver and follow the installation wizards.
  5. After the installation is finished, go to the system preference by clicking the Apple icon at the top right.
  6. Connect your printer via the USB port and turn it on.
  7. Open Print and Fax and click on the plus button on the left side of the window to add a printer. Your new printer should appear on the list. If you didn’t find your printer name, redo step 1 to step 6 and make sure the driver for your current printer is installed properly.
  8. Click on your current printer model and click Choose a Driver or Printer Model, and then click Select Printer Software. Choose your printer from the list and click
  9. Your printer should work properly.

How to Set Up Wireless Connection on Your Canon PIXMA MG5522:

Setting up a wireless connection of Canon PIXMA on your computer is actually pretty easy. This article will describe the steps to install a wireless connection using the WPS connection method. There are some requirements that need to be fulfilled before starting the installation, such as your access point should have a physical WPS push button and your network should use the WPA2 security protocol or WPA.

  1. First, turn on the printer. Press and hold on the Wi-Fi button until the indicator lamp flashes once. Make sure it flashes blue light.
  2. Press the WPS button on your access point within 2 minutes. The blue light will continue flashing while looking for your access point. Once it connects to the access point, the power and Wi-Fi lamp will flash.
  3. If the process is successful, both the power and Wi-Fi lamp will stop flashing and remain lit.
  4. To confirm whether the process is successful or not, try to print out the network settings of your printer.
  5. Put a sheet of paper.
  6. Press and hold the Resume/Cancel button until the indicator lamp flashes 15 times, then release it. Your printer will print the network information page and it means the installation is successful.

Incoming search terms:

Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

News Feed